TheSchell 3D

A-7D/E Corsair II Navy jet aircraft for Poser is a highly detailed historical aircraft figure for the Poser 3D art and animation rendering software. The LTV A-7D Corsair II, a carrier-capable subsonic light attack aircraft, was developed to replace the Douglas A-4 Skyhawk and derived from the Vought F-8 Crusader. This jet, serving both the US Air Force and Navy from the Vietnam War up to the Gulf War, was designed for close air support, interdiction, and armed reconnaissance missions. Key features include a single-seat configuration, a high wing, low horizontal tail, and a chin inlet, with the A-7D specifically incorporating a more powerful Allison TF41-A-2 turbofan engine. The aircraft also featured advanced avionics, including a heads-up display (HUD) and a computerized navigation and bombing system, enhancing its operational capabilities. Here are some of the highlights of this Poser figure: * Over 50 Points of Articulation on the main figure! * Moving Flaps, Ailerons, Spoilers, Rudder. Stabilator, Speed Brakes, Opening Landing Gear Doors, Raising and Lowering Gear, Spin-able Wheels, Steer-able Nose Gear, Opening Canopies, Deployable Slats, Folding Wings, Deployable Tail Hook, Deployable Emergency Drag Chute, Fully Functional Cockpit Flight Controls, and Working Ejection Seat... * Numerous ERC dials for ease of control from one main location, including dials for various basic flight maneuvers. The weapons sets also have ERC controls for ease of use in images and animation! * Nose Radome opens to reveal the AN/APQ Radar Set. * Conforming Dummy Aircrew figure to use to place a Flight Crew in the Cockpit. * Conforming Crew Boarding Ladders and FOD Storage Covers for the Engine and Air Intake. * 12 Separate Conforming Weapons sets designed to be Mixed and Matched to create multiple load-outs for the Weapons most commonly carried by the A7 Corsair, with fully controllable ordinance deployment. These Sets are broken down by mounting location so that each set can be properly mix and matched with the others, allowing a total combination of over 100 variations of weapons loads that can be loaded based on mission requirements! * Note: All of this product`s content was created by "theschell" (Christopher D. Schell) with additional help with ERC controls, Poser MAT Files & Additional Texturing by Mark A. Fares (KageRyu). My thanks to Mark for his extra hard work on this figure!

UNS Coral Sea Space Carrier for Poser is a highly detailed fictional spacecraft figure for the Poser 3D art and animation rendering software. Knowing that the Solinoid fleet would eventually arrive, the UN Military began design studies to incorporate reverse engineered Solinoid technology into various vehicles and vessels. At first, the reverse engineered parts were too large to be fitted into smaller vehicles like aircraft, and required too much power to operate. It was necessary to fit the tech to larger vessels. Experiments were conducted on various decommissioned Naval vessels to find the best way to design and incorporate the new technologies. Once various systems and power management issues had been worked out, the UN quickly implemented a build program to construct Naval warships capable of both atmosphere and space operations. The first such vessels were based upon rebuilt Nuclear Aircraft Carrier hulls, as these ships could provide enough power to meet the energy needs of the Solinoid technology. The UNS Coral Sea is the first of the new breed rebuilt Space Carriers, based on the reconstructed hulls of the retired Midway Class Aircraft Carriers decommissioned by the US Navy. Refitted for Nuclear Fusion Power, and redesigned for Space operations, the UN has 1 more of the class under construction (there had been 3 Midway class ships but one was scrapped years before the discovery of the Solinoids) along with smaller Escort Carrier, Cruiser and Destroyer type ships. Here are some of the highlights: • Over 100 Points of Articulation on the main figure! • Over 50 individually pose-able Weapons Turrets that can be trained and elevated independently. • Working Aircraft Elevators, Hangar Bay Doors, Jet Blast Deflectors, Rudders, Weapons Mounts and Hangar Gantry Cranes with pose-able Hoist Hooks. • Detailed Interiors for the Forward and Rear Hangar Decks, and the Command Bridge. • Pose presets to adjust the scale to Life-sized and back to the Default 1/10th scale to allow users to scale the carrier to match the life-sized scale of my transforming Variable Geometry Fighters. • Includes cr2`s to load both the UNS Coral Sea, and her sister ship the UNS Midway. * Note: All of this product`s content was created by "theschell" (Christopher D. Schell) with additional help with ERC controls, Poser MAT Files & Additional Texturing by Mark A. Fares (KageRyu). My thanks to Mark for his extra hard work on this figure!

Solinoid Vendrik Spacecraft for Poser is a highly detailed fictional spacecraft figure for the Poser 3D art and animation rendering software. The Solinoid Vendrik is the mainstay of the Solinoid Fleet. Unable to access fold-space under its own power, the Vendrik is only found in the company of Solinoid Fleet vessels and must be carried into battle aboard a larger ship. Deployed in the 100`s from Solinoid Hive Carriers, the Vendrik is small, nimble, and deadly. Here are some of the highlights: • Over 15 Points of Articulation on the main figure! • Raising and Lowering Gear, Opening Canopies, fully independently controllable missiles, and much more... • Separate Conforming Figure Weapons and Ordinance, with fully controllable ordinance deployment. (Some sold as separate packs) • Over 50 Independent ERC controls on the main figure for complete control of most vital functions from 1 location. • Independent ERC controls for each moving part. • Articulated Landing gear with co-ordinated ERC for 1 dial raise and lower. • ERC weapons controls for launching and steer-able missiles and ordinance. • Pre-Posed Poses for various flight and landing positions. *Note: All of this product`s content was created by "theschell" (Christopher D. Schell) with additional help with ERC controls, Poser MAT Files & Additional Texturing by Mark A. Fares (KageRyu). My thanks to Mark for his extra hard work on this figure

Solinoid Arcuilaria Space Carrier for Poser is a highly detailed fictional spacecraft figure for the Poser 3D art and animation rendering software. The largest of the Solinoid Fleet ships, the Arcuilaria Hive Carrier (Codenamed Chrysalis Hive by UN Forces) is a massive vessel with incredible destructive power. Armed with numerous Beam Cannons, Tri-barreled Laser weapons, and a massive Focused Beam Array weapon, the Hive Carrier can deliver unparalleled destruction to its target. The Arcuilaria is also home to a Solinoid Hive Queen and her swarms. The Hive Queen has her own separate nest atop the hull of the Arcuilaria in a bridge-like structure, and the hull houses swarms of Solinoid Worker Drones, advance bio-engineered Human-oid Clones, and egg chambers. The Solinoid Arcuilaria has space in its pod-like Hangar Bays for 100`s of Vendrik and Mogwai Fighters, and can launch them in massive swarms at any enemy it faces. Within the huge Hangar Pods, the Solinoid Fighter swarms are maintained in a state of stasis awaiting an order to awaken from the Queen. The Arquilaria class also acts as a sort of Fleet Command and Control ship, and can call on the resources of her escorts, as well as commanding her own assets. Serving as Division Flag-ships, the Arcuilaria is never encountered without a host of smaller support vessels near by. The UN Military has counted dozens of the class in the Solinoid Main Fleet, among hundreds of smaller Vessels. It is feared that even larger vessels may remain out of sight beyond the edges of our solar system. Here are some of the highlights: • Over 100 Points of Articulation on the main figure! • Over 70 individually pose-able Weapons Turrets that can be trained and elevated independently. • Working Main Cannon, Beam and Tri-barrel Turrets, and Hangar Pods • Detailed Interiors for the Hangar Pods, and the Command Bridge. • Pose presets to adjust the scale to Life-sized and back to the Default 1/10th scale to allow users to scale the carrier to match the life-sized scale of my transforming Variable Geometry Fighters. *Note: All of this product`s content was created by "theschell" (Christopher D. Schell) with additional help with ERC controls, Poser MAT Files & Additional Texturing by Mark A. Fares (KageRyu). My thanks to Mark for his extra hard work on this figure!

MiG-17F Fresco fighter jet for Poser is a highly detailed historical aircraft figure for the Poser 3D art and animation rendering software. The MiG-17F Fresco is a high-subsonic, single-seat Soviet fighter jet, designed to improve upon the MiG-15, with features like a thinner wing swept back to 45 degrees and an afterburning engine for enhanced performance. This aircraft, first introduced in 1952, saw its combat debut in the skies over Vietnam and was used in conflicts like the Six-Day War and the Nigerian Civil War, serving as a versatile interceptor and ground-attack aircraft. The MiG-17F, with its ability to outmaneuver many of its contemporaries, was a formidable opponent in dogfights, despite its lack of advanced radar and missile capabilities compared to Western aircraft. Key features of the MiG-17F Fresco fighter jet for Poser * Over 50 Points of Articulation on the main figure! * Moving Flaps, Ailerons, Rudder. Stabilator, Speed Brakes, Opening Landing Gear Doors, Raising and Lowering Gear, Spin-able Wheels, Steer-able Nose Gear, Opening Canopies, Deployable Slats, Folding Wings, Deployable Emergency Drag Chute, Fully Functional Cockpit Flight Controls, and Working Ejection Seat... * Numerous ERC dials for ease of control from one main location, including dials for various basic flight maneuvers. The weapons sets also have ERC controls for ease of use in images and animation! * Conforming Dummy Aircrew figure to use to place a Pilot in the Cockpit. * Conforming Crew Boarding Ladder and FOD Storage Covers for the Engine and Air Intake. * 3 Separate Conforming Weapons sets designed to be Mixed and Matched to create multiple load-outs for the Weapons most commonly carried by the MiG-17 Fresco, with fully controllable ordinance deployment. These Sets are broken down by mounting location so that each set can be properly mix and matched with the others, allowing large variations of weapons loads that can be added based on mission requirements!

F-42U Privateer advanced concept aircraft for Poser is a highly detailed alternate history aircraft figure for the Poser 3D art and animation rendering software. 1946, Guadalcanal. With the war dragging on, the Allied forces look to maintain a technologically superior edge. With a stalemate on land and at sea, and the rise of Aircraft like the Pfeil in Germany, and the Shinden in Japan, the US also looks to improved aircraft for it`s embattled forces. First on the scene is the prototype XP-55 Ascender, followed by the XP-56 Black Bullet (both actual WW2 Aircraft Prototypes), but both are canceled early in 1944 due to serious design problems. After these are a series of improved prototypes leading to the Navy`s first Pusher-Prop which first flies in early 1946. After a Japanese Shinden was captured during the battle of Iwo Jima, the US development teams were finally able to discover and correct the flaws in their own designs. Finally arriving in combat production in September of 1946, the new F42U Privateer is quickly dispatched to Marine and Navy units for full combat evaluation. It is hoped by many back home that new aircraft like the Privateer will help break the stalemate and lead to the defeat of the Imperial Japanese Navy in the Pacific... Features: Numerous conforming extras and over 50 ERC controls for the various parts of the aircraft to allow for maximum usability. Controls include some standard combat maneuvers as well as individual controls for the various moving parts on the aircraft. The model also features a fully detailed interior with working flight controls that are tied by ERC to the flight surfaces and moving parts of the aircraft. Also included are Optional Weapons Sets, a Dummy Pilot, Crew Boarding Ladder, and conforming Prop-Blur effect figures. Included conforming figure add-ons: 1 conforming external "drop-tank" fuel tank is included. This "drop-tank" conforms to the Privateer and is individually pose-able so that the user can make it fall away and tumble as it drops, with ERC dials for ease of use. 1 set of 2 conforming 500lb bombs, with ERC dials for ease of use. 1 set of 6 conforming RP-3 individually pose-able rockets, with ERC dials for ease of use. 1 pair of conforming 250lb bombs that can be individually posed, with ERC dials for ease of use. 1 set of conforming "prop-blur" effects props for the propellers of the aircraft to give a sense of motion in flight. 1 conforming "dummy" pilot figure (this figure is non-pose-able and doesn`t not contain any joints or bones. This figure is low poly but is provided so that you can have a crew in the aircraft for your renders without needing to use the fully rigged figures).