Filter by price
Filter by manufacturer
;

3D Transportation Model | 3D Vehicles Model

This category contains Poser 3D transportation and vehicle models that work seamlessly in Smith Micro Poser software versions 6 through 11, all versions of Poser Pro 3D software, and all versions of DAZ Studio 3D software. Buy 3D transportation and vehicle models for Poser software and DAZ Studio 3D software.

View as Grid List
Sort by
Display per page
New

A-7D/E Corsair II Navy jet aircraft for Poser

A-7D/E Corsair II Navy jet aircraft for Poser is a highly detailed historical aircraft figure for the Poser 3D art and animation rendering software. The LTV A-7D Corsair II, a carrier-capable subsonic light attack aircraft, was developed to replace the Douglas A-4 Skyhawk and derived from the Vought F-8 Crusader. This jet, serving both the US Air Force and Navy from the Vietnam War up to the Gulf War, was designed for close air support, interdiction, and armed reconnaissance missions. Key features include a single-seat configuration, a high wing, low horizontal tail, and a chin inlet, with the A-7D specifically incorporating a more powerful Allison TF41-A-2 turbofan engine. The aircraft also featured advanced avionics, including a heads-up display (HUD) and a computerized navigation and bombing system, enhancing its operational capabilities. Here are some of the highlights of this Poser figure: * Over 50 Points of Articulation on the main figure! * Moving Flaps, Ailerons, Spoilers, Rudder. Stabilator, Speed Brakes, Opening Landing Gear Doors, Raising and Lowering Gear, Spin-able Wheels, Steer-able Nose Gear, Opening Canopies, Deployable Slats, Folding Wings, Deployable Tail Hook, Deployable Emergency Drag Chute, Fully Functional Cockpit Flight Controls, and Working Ejection Seat... * Numerous ERC dials for ease of control from one main location, including dials for various basic flight maneuvers. The weapons sets also have ERC controls for ease of use in images and animation! * Nose Radome opens to reveal the AN/APQ Radar Set. * Conforming Dummy Aircrew figure to use to place a Flight Crew in the Cockpit. * Conforming Crew Boarding Ladders and FOD Storage Covers for the Engine and Air Intake. * 12 Separate Conforming Weapons sets designed to be Mixed and Matched to create multiple load-outs for the Weapons most commonly carried by the A7 Corsair, with fully controllable ordinance deployment. These Sets are broken down by mounting location so that each set can be properly mix and matched with the others, allowing a total combination of over 100 variations of weapons loads that can be loaded based on mission requirements! * Note: All of this product`s content was created by "theschell" (Christopher D. Schell) with additional help with ERC controls, Poser MAT Files & Additional Texturing by Mark A. Fares (KageRyu). My thanks to Mark for his extra hard work on this figure!
$13.00
New

F-8E Crusader jet aircraft for Poser

F-8E Crusader for Poser is a highly detailed historical aircraft figure for the Poser 3D art and animation rendering software. The F-8E Crusader, a carrier-capable supersonic fighter jet, was designed to meet the US Navy's requirements for a high-speed, high-maneuverability aircraft. It was armed with four 20mm cannons and could carry a variety of air-to-air missiles, making it a formidable dogfighter during the Vietnam War. The Crusader's distinctive design featured a high-wing configuration and a variable-incidence wing to facilitate carrier landings, while its powerful Pratt & Whitney J57 turbojet engine allowed for a top speed of Mach 1.53. The F-8E Crusader served with distinction in the US Navy and the French Navy, earning it the title "The Last of the Gunfighters" for its primary use of guns in combat. Key Features: * Over 50 Points of Articulation on the main figure! * Moving Flaps, Ailerons, Spoilers, Rudder. Stabilator, Speed Brakes, Opening Landing Gear Doors, Raising and Lowering Gear, Spin-able Wheels, Steer-able Nose Gear, Opening Canopies, Deployable Slats, Folding Wings, Deployable Tail Hook, Deployable Emergency Drag Chute, Fully Functional Cockpit Flight Controls, and Working Ejection Seats... * Numerous ERC dials for ease of control from one main location, including dials for various basic flight maneuvers. The weapons sets also have ERC controls for ease of use in images and animation! * Nose Radome opens to reveal the AN/APQ Radar Set. * Conforming Dummy Aircrew figure to use to place a Flight Crew in the Cockpit. * Conforming Crew Boarding Ladders and FOD Storage Covers for the Engines and Air Intakes. * 14 Separate Conforming Weapons sets designed to be Mixed and Matched to create multiple load-outs for the Weapons most commonly carried by the F4 Phantom, with fully controllable ordinance deployment. These Sets are broken down by mounting location so that each set can be properly mix and matched with the others, allowing a total combination of over 100 variations of weapons loads that can be loaded based on mission requirements! * Note: All of this product`s content was created by "theschell" (Christopher D. Schell) with additional help with ERC controls, Poser MAT Files & Additional Texturing by Mark A. Fares (KageRyu). My thanks to Mark for his extra hard work on this figure!
$13.00
New

UNS Coral Sea Space Carrier for Poser

UNS Coral Sea Space Carrier for Poser is a highly detailed fictional spacecraft figure for the Poser 3D art and animation rendering software. Knowing that the Solinoid fleet would eventually arrive, the UN Military began design studies to incorporate reverse engineered Solinoid technology into various vehicles and vessels. At first, the reverse engineered parts were too large to be fitted into smaller vehicles like aircraft, and required too much power to operate. It was necessary to fit the tech to larger vessels. Experiments were conducted on various decommissioned Naval vessels to find the best way to design and incorporate the new technologies. Once various systems and power management issues had been worked out, the UN quickly implemented a build program to construct Naval warships capable of both atmosphere and space operations. The first such vessels were based upon rebuilt Nuclear Aircraft Carrier hulls, as these ships could provide enough power to meet the energy needs of the Solinoid technology. The UNS Coral Sea is the first of the new breed rebuilt Space Carriers, based on the reconstructed hulls of the retired Midway Class Aircraft Carriers decommissioned by the US Navy. Refitted for Nuclear Fusion Power, and redesigned for Space operations, the UN has 1 more of the class under construction (there had been 3 Midway class ships but one was scrapped years before the discovery of the Solinoids) along with smaller Escort Carrier, Cruiser and Destroyer type ships. Here are some of the highlights: • Over 100 Points of Articulation on the main figure! • Over 50 individually pose-able Weapons Turrets that can be trained and elevated independently. • Working Aircraft Elevators, Hangar Bay Doors, Jet Blast Deflectors, Rudders, Weapons Mounts and Hangar Gantry Cranes with pose-able Hoist Hooks. • Detailed Interiors for the Forward and Rear Hangar Decks, and the Command Bridge. • Pose presets to adjust the scale to Life-sized and back to the Default 1/10th scale to allow users to scale the carrier to match the life-sized scale of my transforming Variable Geometry Fighters. • Includes cr2`s to load both the UNS Coral Sea, and her sister ship the UNS Midway. * Note: All of this product`s content was created by "theschell" (Christopher D. Schell) with additional help with ERC controls, Poser MAT Files & Additional Texturing by Mark A. Fares (KageRyu). My thanks to Mark for his extra hard work on this figure!
$13.00
New

Solinoid Vendrik Spacecraft for Poser

Solinoid Vendrik Spacecraft for Poser is a highly detailed fictional spacecraft figure for the Poser 3D art and animation rendering software. The Solinoid Vendrik is the mainstay of the Solinoid Fleet. Unable to access fold-space under its own power, the Vendrik is only found in the company of Solinoid Fleet vessels and must be carried into battle aboard a larger ship. Deployed in the 100`s from Solinoid Hive Carriers, the Vendrik is small, nimble, and deadly. Here are some of the highlights: • Over 15 Points of Articulation on the main figure! • Raising and Lowering Gear, Opening Canopies, fully independently controllable missiles, and much more... • Separate Conforming Figure Weapons and Ordinance, with fully controllable ordinance deployment. (Some sold as separate packs) • Over 50 Independent ERC controls on the main figure for complete control of most vital functions from 1 location. • Independent ERC controls for each moving part. • Articulated Landing gear with co-ordinated ERC for 1 dial raise and lower. • ERC weapons controls for launching and steer-able missiles and ordinance. • Pre-Posed Poses for various flight and landing positions. *Note: All of this product`s content was created by "theschell" (Christopher D. Schell) with additional help with ERC controls, Poser MAT Files & Additional Texturing by Mark A. Fares (KageRyu). My thanks to Mark for his extra hard work on this figure
$10.00
New

Solinoid Arcuilaria Space Carrier for Poser

Solinoid Arcuilaria Space Carrier for Poser is a highly detailed fictional spacecraft figure for the Poser 3D art and animation rendering software. The largest of the Solinoid Fleet ships, the Arcuilaria Hive Carrier (Codenamed Chrysalis Hive by UN Forces) is a massive vessel with incredible destructive power. Armed with numerous Beam Cannons, Tri-barreled Laser weapons, and a massive Focused Beam Array weapon, the Hive Carrier can deliver unparalleled destruction to its target. The Arcuilaria is also home to a Solinoid Hive Queen and her swarms. The Hive Queen has her own separate nest atop the hull of the Arcuilaria in a bridge-like structure, and the hull houses swarms of Solinoid Worker Drones, advance bio-engineered Human-oid Clones, and egg chambers. The Solinoid Arcuilaria has space in its pod-like Hangar Bays for 100`s of Vendrik and Mogwai Fighters, and can launch them in massive swarms at any enemy it faces. Within the huge Hangar Pods, the Solinoid Fighter swarms are maintained in a state of stasis awaiting an order to awaken from the Queen. The Arquilaria class also acts as a sort of Fleet Command and Control ship, and can call on the resources of her escorts, as well as commanding her own assets. Serving as Division Flag-ships, the Arcuilaria is never encountered without a host of smaller support vessels near by. The UN Military has counted dozens of the class in the Solinoid Main Fleet, among hundreds of smaller Vessels. It is feared that even larger vessels may remain out of sight beyond the edges of our solar system. Here are some of the highlights: • Over 100 Points of Articulation on the main figure! • Over 70 individually pose-able Weapons Turrets that can be trained and elevated independently. • Working Main Cannon, Beam and Tri-barrel Turrets, and Hangar Pods • Detailed Interiors for the Hangar Pods, and the Command Bridge. • Pose presets to adjust the scale to Life-sized and back to the Default 1/10th scale to allow users to scale the carrier to match the life-sized scale of my transforming Variable Geometry Fighters. *Note: All of this product`s content was created by "theschell" (Christopher D. Schell) with additional help with ERC controls, Poser MAT Files & Additional Texturing by Mark A. Fares (KageRyu). My thanks to Mark for his extra hard work on this figure!
$13.00
New

MiG-17F Fresco fighter jet for Poser

MiG-17F Fresco fighter jet for Poser is a highly detailed historical aircraft figure for the Poser 3D art and animation rendering software. The MiG-17F Fresco is a high-subsonic, single-seat Soviet fighter jet, designed to improve upon the MiG-15, with features like a thinner wing swept back to 45 degrees and an afterburning engine for enhanced performance. This aircraft, first introduced in 1952, saw its combat debut in the skies over Vietnam and was used in conflicts like the Six-Day War and the Nigerian Civil War, serving as a versatile interceptor and ground-attack aircraft. The MiG-17F, with its ability to outmaneuver many of its contemporaries, was a formidable opponent in dogfights, despite its lack of advanced radar and missile capabilities compared to Western aircraft. Key features of the MiG-17F Fresco fighter jet for Poser * Over 50 Points of Articulation on the main figure! * Moving Flaps, Ailerons, Rudder. Stabilator, Speed Brakes, Opening Landing Gear Doors, Raising and Lowering Gear, Spin-able Wheels, Steer-able Nose Gear, Opening Canopies, Deployable Slats, Folding Wings, Deployable Emergency Drag Chute, Fully Functional Cockpit Flight Controls, and Working Ejection Seat... * Numerous ERC dials for ease of control from one main location, including dials for various basic flight maneuvers. The weapons sets also have ERC controls for ease of use in images and animation! * Conforming Dummy Aircrew figure to use to place a Pilot in the Cockpit. * Conforming Crew Boarding Ladder and FOD Storage Covers for the Engine and Air Intake. * 3 Separate Conforming Weapons sets designed to be Mixed and Matched to create multiple load-outs for the Weapons most commonly carried by the MiG-17 Fresco, with fully controllable ordinance deployment. These Sets are broken down by mounting location so that each set can be properly mix and matched with the others, allowing large variations of weapons loads that can be added based on mission requirements!
$13.00
New

F-42U Privateer advanced concept aircraft for Poser

F-42U Privateer advanced concept aircraft for Poser is a highly detailed alternate history aircraft figure for the Poser 3D art and animation rendering software. 1946, Guadalcanal. With the war dragging on, the Allied forces look to maintain a technologically superior edge. With a stalemate on land and at sea, and the rise of Aircraft like the Pfeil in Germany, and the Shinden in Japan, the US also looks to improved aircraft for it`s embattled forces. First on the scene is the prototype XP-55 Ascender, followed by the XP-56 Black Bullet (both actual WW2 Aircraft Prototypes), but both are canceled early in 1944 due to serious design problems. After these are a series of improved prototypes leading to the Navy`s first Pusher-Prop which first flies in early 1946. After a Japanese Shinden was captured during the battle of Iwo Jima, the US development teams were finally able to discover and correct the flaws in their own designs. Finally arriving in combat production in September of 1946, the new F42U Privateer is quickly dispatched to Marine and Navy units for full combat evaluation. It is hoped by many back home that new aircraft like the Privateer will help break the stalemate and lead to the defeat of the Imperial Japanese Navy in the Pacific... Features: Numerous conforming extras and over 50 ERC controls for the various parts of the aircraft to allow for maximum usability. Controls include some standard combat maneuvers as well as individual controls for the various moving parts on the aircraft. The model also features a fully detailed interior with working flight controls that are tied by ERC to the flight surfaces and moving parts of the aircraft. Also included are Optional Weapons Sets, a Dummy Pilot, Crew Boarding Ladder, and conforming Prop-Blur effect figures. Included conforming figure add-ons: 1 conforming external "drop-tank" fuel tank is included. This "drop-tank" conforms to the Privateer and is individually pose-able so that the user can make it fall away and tumble as it drops, with ERC dials for ease of use. 1 set of 2 conforming 500lb bombs, with ERC dials for ease of use. 1 set of 6 conforming RP-3 individually pose-able rockets, with ERC dials for ease of use. 1 pair of conforming 250lb bombs that can be individually posed, with ERC dials for ease of use. 1 set of conforming "prop-blur" effects props for the propellers of the aircraft to give a sense of motion in flight. 1 conforming "dummy" pilot figure (this figure is non-pose-able and doesn`t not contain any joints or bones. This figure is low poly but is provided so that you can have a crew in the aircraft for your renders without needing to use the fully rigged figures).
$15.00
New

A-62M Seishin-Kaze advanced concept aircraft for Poser

F-A-62M Seishin-Kaze advanced concept aircraft for Poser 1946, Guadalcanal. With the success of the J7W Shinden prototype for the Japanese Army Air Corps, the Imperial Japanese Navy also embarks on an advanced aircraft of their own. Paralleling the development of the Shinden, the Navy receives possible designs from numerous manufacturers, and finally settles on a design from Mitsubishi as its newest aircraft. Debuting in combat over the islands of the South-Pacific in October 1946, the IJN`s Mitsubishi A62M Seishin-Kaze ("Spirit Wind", shorted from Seishin no Kaze or "Spirit of the Wind") takes Allied planners by surprise. Much like the earlier A6M Zero, the A62M is a fast and very agile fighter, and a serious threat against its contemporaries in other forces! Features: Numerous conforming extras and over 50 ERC controls for the various parts of the aircraft to allow for maximum usability. Controls include some standard combat maneuvers as well as individual controls for the various moving parts on the aircraft. The model also features a fully detailed interior with working flight controls that are tied by ERC to the flight surfaces and moving parts of the aircraft. Also included are Optional Weapons Sets, a Dummy Pilot, Crew Boarding Ladder, and conforming Prop-Blur effect figures. Included conforming figure add-ons: 1 set of conforming external "drop-tank" fuel tanks is included. These "drop-tanks" conforms to the Seishin-Kaze and are individually pose able so that the user can make them fall away and tumble as they drop, with ERC dials for ease of use. 1 set of 2 conforming 572lb bombs, with ERC dials for ease of use. 1 set of conforming Seaplane Floats. 1 set of conforming "prop-blur" effects props for the propellers of the aircraft to give a sense of motion in flight. 1 conforming "dummy" pilot figure (this figure is non-pose-able and doesn`t not contain any joints or bones. This figure is low poly but is provided so that you can have a crew in the aircraft for your renders without needing to use the fully rigged figures). 1 pose-able Crew Boarding Ladder for use in ground scenes.
$13.00
New

UNS Royal Oak Space Battleship for Poser

UNS Royal Oak Space Battleship for Poser is a highly detailed fictional spacecraft figure for the Poser 3D art and animation rendering software inspired by the real HMS Royal Oak, a Revenge-class battleship that served in the British Royal Navy during World War I that was tragically sunk in Scapa Flow by a German U-boat in October 1939. Knowing that the Solinoid fleet would eventually arrive, the UN Military began design studies to incorporate reverse engineered Solinoid technology into various vehicles and vessels. At first, the reverse engineered parts were too large to be fitted into smaller vehicles like aircraft, and required too much power to operate. It was necessary to fit the tech to larger vessels. Experiments were conducted on various decommissioned Naval vessels to find the best way to design and incorporate the new technologies. Once various systems and power management issues had been worked out, the UN quickly implemented a build program to construct Naval warships capable of both atmosphere and space operations. The first such vessels were based upon rebuilt Nuclear Aircraft Carrier hulls, as these ships could provide enough power to meet the energy needs of the Solinoid technology. Newly built based on earlier trials with converted Aircraft Carrier hulls, the Royal Oak Class Battleship is an entirely new design. Rushed into construction this class has only recently come into active service, as the British contribution to the UN, as preparations continue for the arrival of the Solinoid Fleet. Serving along side the new Coral Sea Class Fleet Carriers, the Royal Oak and her sisters are the heavy striking arm on the fleet and can usually be found at the heart of any deployment with Carriers and other ships at their side! Here are some of the highlights: • Over 100 Points of Articulation on the main figure! • over 70 individually pose-able Weapons Turrets that can be trained and elevated independently. • Working Rudders, Main and Secondary Turrets, Phalanx Turrets, Gantry Cranes, and numerous other functional details! • Highly detailed Hull and Bridge with detailed Bridge Deck areas. • Pose presets to adjust the scale to Life-sized and back to the Default 1/10th scale to allow users to scale the Battleships to match the life-sized scale of my transforming Variable Geometry Fighters. • Includes custom cr2`s to load the UNS Royal Oak, and and all 7 of her sister ships in the class... this gives you 8 ships in total for use in your space scenes! Combine these ships with our UNS Coral Sea and our series of transforming and Sci-fi aircraft for larger fleet formations!
$13.00
New

Boeing P-26A Peashooter aircraft for Poser

The 1932 Boeing P-26A Peashooter is perhaps the coolest aircraft ever built, and certainly has more character than all other Boeing planes combined. A true first in many respects, the Boeing P-26 was the first production all metal monoplane, the last plane to use wing supports, and the only warplane ever plane treated with art-deco embellishments from wingtip to tail. As Powered by the reliable Pratt and Whitney 9 Cylinder WASP radial engine this was Boeing`s only attempt to produce a fighter to this day. The distinguishable P-26 Peashooter served the US Army Air Corps from post WWI into early WWII out of bases from TX, OH, CA and HI. As the US Air Force was established the remaining P-26`s were used for Training and Panama Canal defense. As the Peashooter became obsolete, the remaining P-26 squadrons were split up and sold to foreign nations including air corps representing South America, Asia, Europe and Africa n the post WWI and into WWII. The first kills in a P-36 were recorded by the Chinese Army Air Corps when they successfully repelled an Japanese invasion of 20 medium bombers in 1937. Propeller spins, flight surfaces work, gauges move, bombs drop and gun blaze making this a a true action oriented figure licensed for 3d real time rendering, making it the perfect complement for Poser Pro Game Dev editions. Poser Master Control parameters were developed to mimic actual flight and weapons operations by combining multiple parameter adjustments in sequence so that one adjustment affects several aspects of the model. For instance using the Master Flight Control "Roll Aircraft" will adjust the position of the cockpit flightstick, the opposing position of the wing ailerons and the bank of the airframe. The same level of control is applied to the "Pitch Aircraft" and even "Yaw Aircraft where rudders move in sequence with the cockpit pedal action. Weapons Simulation is also modeled and the master parameters are configured fire machine gun bursts with ammo belt feed and tracer fire sequenced action while the Bomb Release will simulate a sequenced bomb dispense. The 236K poly figure is fully 3d modeled and rigged for close up detail, even with just shaders applied. However, full texture sets are included for Boeing factory "prototype" and US Army versions. Also included are optional textures for cockpit and decal detail should you decide to reduce mesh further for game engine use. The pilot figure shown in the images and animation is not included.
$10.00
New

Rope Ladder with pose animation for Poser

Rope Ladder with pose animation for Poser 3D Software and DAZ 3D Studio runtime, perfect for animating stunts on aircraft and posing from stage rigging. A fully rigged rope ladder perfect for posing as a draped or hanging static prop in renders or animating for action videos and games. Included in this product are 3 texture sets from modern steel and cable grade, vintage aircraft wood and cable, and nautical type jute rope and plank. Also included are animation pose files that can be applied to create many swing, gap jump, and swing cycle movements. .: Product Features :. • Poser figure file (obj, cr2/ png), at 147,578 polygons. .: Animated Poses :. • 45 Start Swing 120F • 45 Start swing to rest 240F • 90-90 Tarzan Swing 2400F • 180 Swing Cycle 240F • 180 Swing Cycle Rest 240F • Poser 4 Child Swinging 60F • Rope and Jute Ladder Default • Rope Ladder 360 Full • Rope Ladder 360 Return • Rope Ladder All 120F • Rope Ladder Breeze Swing 20f • Rope Ladder Dragging • Rope Ladder Light Swing • Rope Ladder Start Drag • Rope Ladder Swing Cycle 60F • Rope Ladder Swing • Rope Lader 360 Swing • Rope Swing with P4 Child .: Materials :. • Cable and Wood • Jute and Wood • RopeLadder Default This product is fully licensed for 2D and 3D Publishing.
$6.50